Semi-automatic One Spindle Double Heads Winding Machine

Introduction of Semi-automatic One Spindle Double Head Winding Machine:

Semi-automatic One Spindle Double Head Winding Machine is a kind of high speed wire winding machine. This wire winder is applicable to winding the sewing threads, embroidery threads, nylon threads and so on. This wire winding machine has computer-based separate control of each single spindle, and you could set the parameters independently through the display screen. Also there is a frequency-change slotted spool yarn guide device on this wire winding machine. An electro-magnetic tension control system and a pump-based cycling-type oiling device are installed on this wire winding machine which ensures that yarns could have a great shape formation.

This wire winder is well designed and when it is working, work can be very highly efficient. As simple yarn paths are adopted, this wire winding machine is very easy to operate. With this wire wingding machine, you can have great assured safety and reliability and broad applicability.

Advantages of Semi-automatic One Spindle Double Head Winding Machine:

1. The yarn paths of this wire winder is well designed that could reduce the loss of yarns. What’s more, the simple design makes the operation become a simple thing that enhances people's efficiency.
2. Each spindle of this wire winding machine can be controlled by individual motors. Single control improves the package shape of yarns. And you can set different parameters for different spindles.
3. Each spindle of this high speed wire winder has two bobbin heads. You can use one spindle to control two packages in the same time. Of course, these two packages are the same.

Winder Parameter Table on the Top Board:

Password: Range of 00000~9999
Full spool length: Range of 0~60000 m
Winding linear speed: 200~1000 m/min
Oil wheel speed ratio: 30~200
Winding initial tension: 0~100%
Winding end tension: 0~100%
Yarn-detector state: 0.0~9999 s
Empty spool position confirmation: Computer test value
Fixed block position confirmation: Computer test value
Length correction coefficient: 0.800~1.200

Main Specification of One Spindle Double Head Winding Machine:

Model: HR0604-A / HR0604-H / HR0604-Y
Shape formation: Conic shape/Cylindrical shape/Pagoda shape
Tube angle: 2°20′/ 0°/ 0°~2°20′
Max. Winding outside diameter: Φ115
Spindle number: 4
Max. Linear speed: 1000 m/min
Pattern round number: 3~4